Industrial PoE Injector

This industrial grade PoE power injector is specifically designed to support deployment of Redline’s powerful machine-to-machine (M2M) wireless systems in the harsh industrial environment of off-grid, underserviced and isolated locations reliant primarily on reliable DC power.

  • PoE Injector

    Features and Benefits

    • Ideal for any site where the primary or preferred power source is DC (solar panels/battery)
    • Deployable with any compatible PoE powered device (PD) including IP cameras, IP access controls, and wireless access points (AP)
    • Advanced design and rugged components exceed industry standards for stability and robustness
    • Wide 10 - 60 VDC input range with reverse-polarity protection, over voltage protection, and 600 V input-to-output isolation
    • Wide operating range from -40° to 75° C (-40° to 167° F) without heaters, fans or cooling apparatus minimizes maintenance.

    Purpose-built to meet the tough operating conditions of oil & gas, military, and utility applications, Redline’s PoE power-sourcing equipment (PSE) unit supports 12 / 24 / 48 VDC power systems.

    The durable aluminum shell, quality connectors, and high design tolerances guarantee reliable operation under adverse operating conditions including extremely high or low temperatures.

    Dual inputs are provided to accommodate redundant DC power options (e.g. A/B battery banks).

    The PoE supports negative supply operation with TELCO -48 VDC wiring for installation in communications and power panels.

    Product Complements

    The Industrial PoE Power Injector is fully compatible with the RDL-3000 family of wireless systems.

  • Interfaces

    RJ45 Jack Shielded Ports: 10/100Base-T(X) for PoE and ETH, surge protection on all wires.
    LED Indicators: Power, PoE Mode Power
    Connector: Screw down terminal Block x 1 with Redundant Power

    IEEE Compliance

    802.3 10BaseT
    802.3u 100BaseTX
    802.3af / 802.3at

    Input Voltage

    10 through to 60 VDC

    Output Voltage

    52 VDC +/- 3%

    Output Power

    30 Watts max. (25 Watts @ 12 VDC input)

    Input to Output Isolation

    2121 VDC min; 1500 VAC min


    Type 2 – Supply 30 W over two pairs

    Powering Schemes

    Alternative B – Pairs 4/5 & 7/8

    Input Voltage Protection

    Over-voltage and reverse polarity

    DC Cable

    12 - 16 AWG solid or stranded wire

    Network Connection

    10/100Base-T Ethernet (RJ-45)



    Operating Temp

    -40° to 75° C (-40° to 167° F)


    5% to 95% non-condensing


    Aluminum IP40 (1 mm objects)

    Power Consumption

    >80% efficiency @ 21°C (71° F)


    Safety1: CSA/UL C22.2 60950 to +75° C (1670 F)
    EMI: FCC Part 15 Subpart B Class A, EN 55022 CISPR22 Class A
    EMS: EN 61000-4-2 (ESD) Level 3, EN 61000-4-3 (RS) Level 3, EN 61000-4-4 (EFT) Level 3, EN 61000-4-5 (Surge) Level 3, EN 61000-4-6 (CS) Level 3, EN 61000-4-8
    Shock1: IEC 60068-2-27
    Freefall1: IEC 60068-2-32
    Vibration1: IEC 60068-2-6
    Hazardous locations1: UL1604,
    CSA C22.2/213 (Class I, Div. 2); EN60079-15 (Zone 2; Category 3), CE (ATEX)

    Dimensions (WxHxD)

    111.5 x 32.5 x 137 mm (4.39 x 1.28 x 5.40 in)


    360 g (0.8 lbs)

Have a question? Contact Us.